Evoke 50 is a full three-way floorstander with a 28mm soft-dome tweeter, a 15cm neodymium midrange driver and twin 18cm woofers.
Evoke 50 features Dynaudio’s newest tweeter: Cerotar. It’s a brand-new, ground-up design that uses key technologies from the award-winning Esotar Forty anniversary tweeter, the awesome new Contour series and the all-singing, all-dancing tech-fest that is the all-new Confidence.
-
New Cerotar tweeter
A brand-new 28mm Ferrite+ soft-dome tweeter inspired by Special Forty and Confidence
-
Hexis
An ingenious resonance-defeating inner tweeter dome trickled down directly from our most exclusive ranges
-
New Esotec+ woofer
Two long-throw 18cm one-piece MSP cones with copper voice-coils and strontium carbonate Ferrite+ ceramic magnets
-
New neodymium midrange
A 15cm MSP driver derived directly from the Contour range. True high-end midrange performance
-
Versatile bass ports
Two-part plugs mean you can tune bass response precisely for your room and tastes
-
Danish design
Timeless, honest and beautiful: subtly curved MDF with hidden screws and four beautiful, clean finishes
| Sensitivity: |
87dB (2.83V/1m) |
|---|
| IEC power handling: |
260W |
|---|
| Impedance: |
4 Ω (3 Ω minimum @100Hz) |
|---|
| Frequency response (±3dB): |
35Hz–23kHz |
|---|
| Box principle: |
Bass reflex rear ported |
|---|
| Crossover: |
3-way |
|---|
| Crossover frequency: |
430/3500Hz |
|---|
| Crossover topology: |
3rd/2nd order |
|---|
| Woofer: |
2x18cm MSP cone |
|---|
| Midrange: |
15cm MSP |
|---|
| Tweeter: |
28mm Cerotar with Hexis |
|---|
| Weight: |
26.9kg/59.3lb |
|---|
| Dimensions (W x H x D): |
215x1140x307mm |
|---|
| |
8.5x44.9x12.1in |
|---|
| Dimensions with feet/grille (W x H x D): |
305x1162x373mm |
|---|
| |
12.0x45.7x14.7in |
|---|
Have any questions
